Skip to content

Firmware updates

The PenScreen firmware, its display name and its boot logo can be updated from a computer, over the USB-C cable. The screen never needs to be opened.

YUMI PenScreen boot logo

Boot logo artwork. On the screen, the logo shows at power-on and disappears as soon as a video signal arrives.

Current status

No update has been published yet: every screen ships with the current firmware.

When an update is available, the file and the step-by-step procedure will be published on this page.

Use only YUMI-LAB update files

Only use update files published on this page. A firmware meant for another screen can make the PenScreen unusable. Keep the USB-C cable connected during the whole update.

Check your version

The display name seen by the computer (YUMi-SF15TPEN) and the serial number on the rear label identify your screen. Give both when you contact support.